SSANGYONG Y200
M161 ENGINE MECHANICAL 1B2-3
Removal & Installation Procedure
1. Disconnect the negative terminal of battery.
2. Remove the hood.
3. Remove the under cover.
Installation Notice
Tightening Torque
YAD1B020
4. Disconnect the coupling of HFM sensor and
remove the air cleaner cross pipe.
YAD1B4T0
5. Remove the air cleaner cover. Remove the
mounting bolts and air cleaner housing and
element assembly.
YAD1B4U0
6. Loosen the radiator drain cock and drain the
coolant.
Notice: Open the coolant reservoir cap.
YAD1B040
28 - 47 N•m
(21 - 35 lb-ft)