SSANGYONG Rexton Y200 Manual page 288

1B3-20 DIESEL ENGINE MECHANICAL
7 Tensioning Pulley
8 Crankshaft
9 Generator
10 Water Pump
11 Guide Pulley
12 Power Steering Pump
13 A/C Compressor
Removal & Installation Procedure
1. Remove the tensioning lever nut (1).
Installation Notice
Tightening Torque
2. Push the tensioning lever in direction of arrow with
a rod ( φ 12, 180 mm) and pull out the bolt to the
rear.
YAD1BB30
3. Push back the tensioning lever (arrow direction)
to release the spring tension and remove the belt.
YAD1BB40
4. Install the poly V-belt beginning at the tensioning
pulley (7).
YAD1BB50
Length of Belt
Length (L)
21 N•m (15 lb-ft)
With Air Conditioner
Without Air Conditioner
2,100 mm
2,040 mm
SSANGYONG Y200