SSANGYONG Rexton Y200 Manual page 292

1B3-24 DIESEL ENGINE MECHANICAL
Removal & Installation Procedure
1. Remove the tensioning lever nut.
Installation Notice
Tightening Torque
2. Push the tensioning lever in direction of arrow with
a rod (φ 12, 180 mm) and push out the bolt to the
rear.
YAD1BB30
3. Push back the tensioning lever to release the
spring tension and remove the belt.
YAD1BB40
4. Remove the bolt (9) and then remove the belt pulley
(8).
Installation Notice
Tightening Torque
YAD1BB70
5. Remove the bolt (1, 18) and take off the damper
(2).
Installation Notice
Tightening Torque
Pay attention to installation position of the damper.
YAD1BB80
21 N•m (15 lb-ft)
10 N•m (89 lb-in)
bolt (1) : 21 N•m
(15 lb-ft)
bolt (18): 20 N•m
(15 lb-ft)
SSANGYONG Y200