SSANGYONG Rexton Y200 Manual page 139

1B1-98 M162 ENGINE MECHANICAL
Removal & Installation Procedure
1. Drain the coolant from the crankcase.
2. Remove the each coolant line and hose.
YAD1B3D0
3. Remove the oil filter bolt and then remove the oil
filter.
Installation Notice
Tightening Torque
Replace the oil filter gasket.
4. Installation should follow the removal procedure
in the reverse order.
5. Check engine oil level.
6. Run the engine at idle and check the engine for
leaks.
22.5 - 27.5 N•m
(16.6 - 20.3 lb-ft)
SSANGYONG Y200