Table of Contents
Advertisement
SSANGYONG Y200
M161 ENGINE MECHANICAL 1B2-55
Removal & Installation Procedure
1. Turn the crankshaft and position the no.1 cylinder
piston at ATDC 20 ° .
YAD1B6D0
2. Put the alignment marks (arrows) on the camshaft
sprocket and the timing chain.
3. Remove the chain tensioner.
Installation Notice
Tightening
Torque
YAD1B6F0
4. Remove the exhaust camshaft sprocket.
Installation Notice
Tightening Torque
Notice: The sprocket bolt is designed to be used
only once, so always replace with new one.
5. Take off the timing chain from intake camshaft
sprocket, and secure it not to fall down into the
timing gear case.
YAD1B6G0
6. Using the wrench (7), turn the camshaft until there
is no resistence in camshaft bearing area.
YAD1B7E0
Screw Plug
40 N•m
(30 lb-ft)
72 - 88 N•m
Tensioner
Assembly
(53 - 65 lb-ft)
1st step: 18 - 22 N•m
(13 - 16 lb-ft)
2nd step:60° ± 5°
Advertisement
Chapters
Table of Contents
