SSANGYONG Y200
REAR AXLE HOUSING
Removal
1. Remove the tire.
2. Remove the connecting rod of LCRV assembly &
fixing nut of axle housing bracket.
YAD3D240
3. Disconnect the brake oil hose & oil line (pipe)
1 Brake pipe nut.
2 Brake pipe mounting clip
3 3-way connector
4 Brake pipe assembly
YAD3D250
4. Detach the air breather.
YAD3D260
5. Remove the propeller shaft from rear axle input
shaft.
Notice: Do alignment marks before removing.
YAD3D270
REAR AXLE 3D-13