SSANGYONG Rexton Y200 Manual page 353

SSANGYONG Y200
DIESEL ENGINE MECHANICAL 1B3-85
Installation Procedure
1. Fit the piston onto the connecting rod so that the
arrow (15) and the locking slot (16) are facing in
direction of the vehicle.
YAD1BFL0
2. Coat the piston pin (15) with engine oil and insert
it by hand.
Notice: Do not heat up the piston.
YAD1BFM0
3. Install the new snap ring (4) into the grooves
(arrow).
4. Check the piston rings (1, 2, 3) and replace them
if necessary.
YAD1BFN0
5. Install and arrange the piston rings to be evenly
120° from each ends gap.
YAD1B2V0