SSANGYONG Rexton Y200 Manual page 452

Failure
Description
Code
Camshaft actuator short
circuit to battery
226
Camshaft actuator short
circuit to ground or
227
open
Camshaft Actuator Current Consumption Inspection
1. Run the engine to reach the coolant temperature above 70 ° C.
2. Increase the engine rpm up to 2000 rpm
3. Measure the current between the No. 1 and No. 2 pin of the camshaft actuator connector.
Specified Value
Notice: If the measured value is not within the specified value, check the cable.
SSANGYONG Y200
Trouble Area
When malfunction of cam
phasing control
1 ~1.5 A
M162 ENGINE CONTROLS 1F1-21
Maintenance Hint
•
Monitoring the actual operational status
through scan tool
•
Inspection the ECM pin 73 about short
circuit or open
•
Inspection the power source short circuit
or open to cam actuator
•
Inspection the magnet and hardware
•
Inspection the ECM
YAD1F150