4B-4 FRONT BRAKE
yyyyy
yyyyy
yyyyy
yyyyy
yyyyy
yyyyy
yyyyy
INSPECTION
yyyy
yyyy
yyyy
yyyy
yyyy
yyyy
YAD4B040
YAD4B050
Clean the dissembled parts and visually check the
followings;
•
Wear, rust and damage on the cylinder and piston
•
Damage, crack on the caliper body and damage,
wear on the guide pin
•
Pad uneven wear and oil contamination
•
Boot's damage and tear
•
Disc plate's scratch and bending
PAD THICKNESS
1. Remove the front wheel.
2. Measure the thickness and replace as needed.
Thickness
10 mm
BRAKE DISC THICKNESS
1. Measure the thickness of the rotor at four or more
points around the circumference of the rotor.
2 If the thickness of the rotor is below the specified
value, replace the brake rotor.
Thickness
24 mm
Max wear Limit
2 mm
Max wear Limit
22 mm
SSANGYONG Y200