SSANGYONG Rexton Y200 Manual page 666

Hide thumbs Also See for Rexton Y200:

Table of Contents

1F3-42 DIESEL ENGINE CONTROLS

Removal & Installation Procedure

1. Remove the vacuum line.

2. Remove the bolts (1) evenly.

Notice: If necessary, rotate the engine until the

pressure on the tappet of the vacuum pump is

3. Remove the vacuum pump (2).

4. Install the vacuum pump (2).

Installation Notice

Tightening Torque

Clean the gasket residues of sealing surface of

vacuum pump and replace the gasket (5).

5. Connect the vacuum line.

10 N•m (89 lb-in)

SSANGYONG Y200

Chapters

Table of Contents