SSANGYONG Rexton Y200 Manual page 762

SSANGYONG Y200
•
Remove the hub & brake disc assembly.
YAD3A120
6. With full time transfer case only
•
Remove the hub nut & washer.
Notice: For assembly, after you coincide the
groove of drive shaft tip with the hub tip and cork,
apply the paint and grease to the corking part.
YAD3A130
•
Remove the front disc assembly from the axle
shaft.
YAD3A140
•
Remove three wheel bearing bolts (M12) and
pull off hub assembly by using the special tool.
Notice: For reassembly, replace the wheel bearing
bolt with new one which applied the lock tight (blue
color).
YAD3A150
FRONT AXLE 3A-13