SSANGYONG Rexton Y200 Manual page 406

SSANGYONG Y200
DIESEL ENGINE MECHANICAL 1B3-137
Checking
Notice: The noise which continues short time during
short travel (frequent starting of the engine) or engine
starting after a long time storage is normal operating
conditions. So, it does not need to be repaired.
Determine the malfunctions in valve clearance
compensation device with noise through following tests.
If defective, replace as respectively.
1. Run the engine at more than 3000rpm for approx.
4 minutes.
2. Stop the engine. After 5minutes, check the engine
oil level and adjust if necessary.
YAD1BJH0
3. Remove the cylinder head cover.
4. Check the valve tappets at TDC position of each
cylinders.
5. Using a drift, lightly press the valve tappet and
measure clearance between the cam and valve
tappet.
Notice: If the clearance exceeds 0.4mm, replace
the valve tappet.
6. If a valve tappet moves down too far in comparison
to the others, replace the valve tappet.
7. Rotate the engine and check the remaining valve
tappets.
Notice:
•
Unnecessary rotation of the engine will damage
the valve tappets.
•
Do not rotate the engine by using the camshaft
sprocket bolt or to the opposite direction of the
engine rotation.