SSANGYONG Rexton Y200 Manual page 376

SSANGYONG Y200
DIESEL ENGINE MECHANICAL 1B3-107
7. Drive in new valve guide with drift (Intake: 601
589 05 15 00, Exhaust: 601 589 06 15 00) (8) until
the wire ring makes contact.
Notice: The valve guide must be driven in from
the cylinder head cover.
YAD1BH00
8. Check the valve guide bore with GO / NO GO
gauge (Intake: 102 589 00 23 00, Exhaust: 117
589 03 23 00) (9).
The GO side (marked '0') should just still drop.
If the GO side cannot be inserted, the bore of valve
guide should be reamed.
Notice: Perform the check only on cooled down
cylinder head.
YAD1BH10
9. If necessary, ream the valve guide bore evenly
with a reamer (Intake: 000 589 21 53 00, Exhaust:
000 589 10 53 00) (10).
Notice: Never turn the reamer against the direction
of rotation.
YAD1BH20