SSANGYONG Rexton Y200 Manual page 763

3A-14 FRONT AXLE
7. Remove two dust shield mounting bolts (M6) and
pull off the dust shield.
YAD3A160
8. Remove the split pin and nut from the steering
knuckle arm and upper arm ball joint connection.
Notice: For assembly, replace the split pin with
new one.
9. Remove the split pin and nut from the steering
knuckle arm and lower arm ball joint connection.
Notice: For assembly, replace the split pin with
new one.
YAD3A170
10. Carefully remove the steering knuckle assembly.
YAD3A180
11. Remove the drive shaft using the special tool.
YAD3A190
SSANGYONG Y200