Knock Sensor (Ks) - SSANGYONG Rexton Y200 Manual

Hide thumbs Also See for Rexton Y200:

Table of Contents

1F2-22 M161 ENGINE CONTROLS

KNOCK SENSOR (KS)

The Knock Sensor (KS) detects abnormal knocking in the engine. The two KS are mounted in the engine block

near the cylinders. The sensors produce an output voltage which increases with the severity of the knock. This

signal is sent to the Engine Control Module (ECM) via a shielded cable. The ECM then adjusts the ignition timing

to reduce the spark knock.

SSANGYONG Y200

Table of Contents