SSANGYONG Rexton Y200 Manual page 186

SSANGYONG Y200
M161 ENGINE MECHANICAL 1B2-25
Removal & Installation Procedure
1. Disconnect the camshaft adjuster connector and
remove the camshaft adjuster (E23 engine only).
Installation Notice
Tightening Torque
YAD1B6A0
2. Remove the cylinder head front cover.
Installation Notice
Tightening
Torque (3)
Tightening
Torque (4)
Apply the sealant at the mating surface of the
cylinder head and the front cover.
3. Remove the O-Ring.
Notice: Replace the O-ring with new one and apply
YAD1B6B0
the sealant.
4. Installation should follow the removal procedure
in the reverse order.
9 - 11 N•m
(80 - 97 lb-ft)
22.5 - 27.5 N•m
(16.6 - 20.3 lb-ft)
9 - 11 N•m
(80 - 97 lb-in)