1B3-146 DIESEL ENGINE MECHANICAL
Machining Procedure
Valve machining is required :
-
When the valve is leaking.
-
When replacing the valve.
-
When replacing the valve guide.
-
When replacing the valve seat or valve seatring.
1. Machine the valve seat (
YAD1BJW0
2. Measure valve seat width 'b'.
Valve seat
width 'b'
YAD1BJX0
3. If the specification is exceeded, the valve seat
width has to be corrected at the lower free angle
of 'β' =65°.
YAD1BJY0
4. Measure radial runout.
YAD1BJZ0
α
=45°).
Intake
1.2 - 1.7 mm
Exhaust
1.5 - 2.0 mm
Max. 0.03 mm
Runout
SSANGYONG Y200