SSANGYONG Rexton Y200 Manual page 217

1B2-56 M161 ENGINE MECHANICAL
7. Remove the bearing cap, and remove the intake
and the exhaust camshaft.
Installation Notice
Tightening Torque
Notice: Check the numbers on the bearing cap
not to be mixed up.
YAD1B7F0
8. Apply the engine oil on the valve tappet and cam-
shaft bearing.
9. Installation should follow the removal procedure
in the reverse order.
Notice:
•
Base circle of cam should cantact with the valve
tappet.
•
Install the camshaft bearing caps according to
the numbers on the cylinder head cast and
bearing cap.
10. Check the camshaft timing position.
YAD1B7G0
60 - 70 N•m
(44 - 52 lb-ft)
SSANGYONG Y200