Axle Housing - SSANGYONG Rexton Y200 Manual

SSANGYONG Y200

AXLE HOUSING

Removal/Installation
1. Remove the propeller shaft from the front axle input
shaft.
Installation Notice
Tightening Torque
2. Remove the steering gear linkage.
YAD3A340
3. Remove the breather hose.
4. Remove the cross member and axle housing
mounting nut (1).
Installation Notice
Tightening torque
5. Remove the frame and cross member mounting
nut (2) and pull off the cross member.
Installation Notice
Tightening Torque
YAD3A350
6. Support the axle housing on a suitable jack,
remove the axle housing mounting bracket nuts.
Installation Notice
Tightening Torque
YAD3A360
7. Lowering the jack carefully, remove the axle
housing assembly.
8. Installation should follow the removal procedure
in the reverse order.
YAD3A370
FRONT AXLE 3A-19
81 - 89 N•m
(60 - 66 lb-ft)
95 - 142 N•m
62 - 93 N•m
(45 - 69 lb-ft)
62 - 93 N•m
(45 - 69 lb-ft)