SSANGYONG Rexton Y200 Manual page 727

2D-12 REAR SUSPENSION
13. Loosen the brake & hose and remove the spring
by pushing to incline the rear axle.
YAD2D190
14. Remove the mounting nut of the shock absorber
bottom and the upper arm. And then remove the
spring.
YAD2D200
Installation Procedure
1. Installation should follow the removal procedure
in the reverse order.
2. Be careful to the installation direction of the coil
spring to install the spring correctly.
Notice:
1. Be careful that the diameter of the upper coil
spring is longer than that of the lower's.
2. Verify that the coil spring should be installed
onto the spring seat of the axle and body(frame)
correctly.
YAD2D210
SSANGYONG Y200