SSANGYONG Rexton Y200 Manual page 253

1B2-92 M161 ENGINE MECHANICAL
Removal & Installation Procedure
1. Unscrew the bolt (6) from the oil pump drive
sprocket and separate the oil pump drive chain.
Installation Notice
Tightening Torque
2. Unscrew the bolts (4,5) and remove the oil strainer
assembly (3).
Installation Notice
YAD1B7V0
Tightening Torque
Insert the steel gasket into the oil pump and bolt
(4) mounting surface.
3. Unscrew the six bolts (11) and remove the baffle
plate.
Installation Notice
Tightening Torque
4. Unscrew the three bolt (1) and remove the oil
pump.
Installation Notice
Tightening Torque
YAD1B7W0
25 - 39 N•m
(21 - 26 lb-ft)
Bolt (4): 9 - 11 N•m
(80 - 97 lb-ft)
Bolt (5): 9 - 11 N•m
(80 - 97 lb-ft)
70 N•m (52 lb-ft)
22.5 - 27.5 N•m
(16.6 - 20.3 lb-ft)
SSANGYONG Y200