Maintenance And Replacement; Separation - SSANGYONG Rexton Y200 Manual

MAINTENANCE AND REPLACEMENT

SSANGYONG Y200

SEPARATION

1. Fix the tire into the equipment and pull out the
valve core from the tire. Discharge the air inside
the tire completely.
Notice: The assembly and disassembly of the tire
is dangerous working job. So, only the skillful
worker must work this job following the approved
procedures.
YAD2E360
2. Tighten the locker in the center of the equipment
to assemble the rim to the equipment.
3. Remove the balance weight on the rim.
YAD2E370
4. Separate the tire's bead from the rim flange using
the approved lubricant.
Notice: Do not use silicone, synthetic detergent
and gasoline, etc.
YAD2E380
TIRES AND WHEELS 2E-15