SSANGYONG Rexton Y200 Manual page 117

1B1-76 M162 ENGINE MECHANICAL
5. Install the engine lock to the ring gear to prevent
the crankshaft from rotating.
6. Blow up with compressed air.
YAD1B680
7. Install the lever pusher 111 589 18 61 00 (8) and
the thrust piece 111 589 25 63 00 (7).
8. Mount the thrust piece 111 589 25 03 00 (7)
vertically to the valve spring retainer (2).
9. Press the valve spring (3) by using the lever
pusher 111 589 18 61 00 (8).
10. Remove the valve cotter (1) using the pincette.
11. Remove the upper retainer (2) and the valve spring
(3).
YAD1B1E0
12. Remove the valve stem seal (4).
Notice: Check the valve stem seal for damage
and replace if necessary.
13. Remove the lower retainer (5).
Notice: Check the retainer for damages and
replace with a new one if necessary.
14. Installation should follow the removal procedure
in the reverse order.
YAD1B1F0
SSANGYONG Y200