Stabilizer - SSANGYONG Rexton Y200 Manual

SSANGYONG Y200

STABILIZER

Removal Procedure
1. Remove the skid plate at front bottom side.
YAD2C090
2. Remove the upper mounting nut and the lower
mounting nut from the front stabilizer bar link.
Remove the front stabilizer bar link.
YAD2C100
3. Remove the mounting cap bolt from the front
stabilizer bar and remove the front stabilizer bar.
YAD2C110
Installation Procedure
1. Install the front stabilizer bar to the frame and
tighten manually the stabilizer bar mounting cap
bolt. It allows the bar link to install to it's original
position.
Installation Notice
Tightening Torque
YAD2C120
FRONT SUSPENSION 2C-11
60 - 80 N•m
(44 - 59 lb-ft)