Unit Repair; Propeller Shaft - SSANGYONG Rexton Y200 Manual

SSANGYONG Y200

PROPELLER SHAFT

Disassembly
1. Mark the assembly mark and remove the propeller
shaft.
2. Do alignment mark before separating the spider.
YAD3C120
3. Remove the snap ring using the snap ring plier.
YAD3C130
4. Slightly tapping the yoke shoulder using a brass
hammer, remove the bearing.
Remove the remaining bearing in the same way.
YAD3C140
5. If it is not removed, clamp the welding part of
yoke in the vise.
YAD3C150
PROPELLER SHAFT 3C-9

UNIT REPAIR