Table of Contents
Advertisement
ABS Indicator Lamp Illuminated Continuously, No DTCs Stored
Step
Check the EBCM connector.
1
Is it connected properly?
Connect the EBCM connector.
2
Is the repair complete?
1. Disconnect the EBCM connector.
2. Turn the ignition to ON.
3
3. Use an insulated tool to push the shorting bar in
the connector away from terminal 20.
Does the ABS indicator lamp go out?
Replace the ABS unit
4
Is the repair complete?
Repair the short to ground in circuit Lg between I/P
cluster connector B7 and terminal 20 EBCM.
5
Is the repair complete?
SSANGYONG Y200
Action
ABS AND TCS 4E-37
Value
Yes
-
Go to Step 3
-
System OK
-
Go to Step 4
-
System OK
-
System OK
No
Go to Step 2
-
Go to Step 5
-
-
Advertisement
Chapters
Table of Contents
