SSANGYONG Rexton Y200 Manual page 258

SSANGYONG Y200
M161 ENGINE MECHANICAL 1B2-97
Tools Required
102 589 00 15 00 Drift
Replacement Procedure
1. Remove the intake and exhaust manifolds.
2. Pull back the core plug until the end of one side
comes out using the screw driver.
YAD1B3Z0
3. Pull out the plug carefully using a pliers.
YAD1B4A0
4. Clean the sealing surface and apply Loctite 241.
YAD1B4B0
5. Press in new plug using a drift.
Notice: Wait for about 45 minutes before filling
the coolant so that the Loctite 241 hardens.
6. Warm up the engine and check the coolant for
leaks.
YAD1B4C0