SSANGYONG Rexton Y200 Manual page 386

SSANGYONG Y200
DIESEL ENGINE MECHANICAL 1B3-117
6. Install the camshaft sprocket to be aligned the
markings of the camshaft / camshaft bearing cap
(arrow).
Notice: Align the alignment marks on the timing
chain and sprocket.
YAD1BC30
7. Tighten the camshaft sprocket bolt.
Installation Notice
Tightening Torque
YAD1BC70
Notice: If max. length 'L' of the 12-sided bolt
exceeds 53.6mm, replace it.
YAD1BCS0
8. Install the chain tensioner.
Installation Notice
Tightening Torque
Replace the seal.
Before installation, by pumping in the oil approx.
10 times, fill the oil.
YAD1BHJ0
25 N•m (18 lb-ft)+ 90°
80 N•m (59 lb-ft)