SSANGYONG Rexton Y200 Manual page 296

1B3-28 DIESEL ENGINE MECHANICAL
Cylinder Head Bolts (12-sided socket head)
(Engine cold)
M8 Cylinder Head Bolts
Cylinder Head Bolt Tightening Torque
YAD1BBD0
YAD1BBE0
1st Step
2nd Step
3rd Step
Tightening Sequence for Cylinder Head
Bolts
Notice: The cylinder head may only be removed when
the engine has cooled down. The cylinder head is
removed together with the exhaust manifold. As the
cylinder head bolts undergo a permanent tightening.
They require to be replaced if they exceed the
maximum lengthes indicated in the table.
Thread Dia. Length(L) When New
M10 80 mm
M10 102 mm
M10 115 mm
The twelve-sided socket head bolts are tightened with
each stages of torque and torque angle.
It is not necessary to retighten the cylinder head bolts
at the 1000~1500 km inspection or after 1000~1500
km of repairs.
10 N•m (89 lb-in)
35 N•m (26 lb-ft)
180°
25 N•m (18 lb-ft)
Max. Length(L)
82 mm
104 mm
117 mm
SSANGYONG Y200