SSANGYONG Rexton Y200 Manual page 226

SSANGYONG Y200
M161 ENGINE MECHANICAL 1B2-65
4. Carefully unscrew the screw plug (1), and remove
the seal (2).
Notice:
•
For the removal of screw plug, be careful that it
can be jumped out due to the force of
compression spring.
•
Remove the screw plug only when the seal and
compression spring are damaged.
5. Carefully remove the filler pin (3), compression
spring (4), snap ring (5), and the thrust pin (6).
YAD1B1Q0
6. Remove the chain tensioner housing (7) and the
seal (8).
YAD1B1R0
Installation Procedure
1. Connect the thrust pin (6) and the snap ring (5) to
the chain tensioner housing (7).
Notice: When connecting the thrust pin, push in
the thrust pin far enough so that it doesn't protrude
at the chain tensioner housing.
2. Install the chain tensioner housing (7), thrust pin
(6), snap ring (5), and the seal (8).
Installation Notice
Tightening Torque
3. Insert the compression spring (4) with the filler
pin (3) into chain tensioner housing.
YAD1B1S0
72 - 88 N•m
(53 - 65 lb-ft)