SSANGYONG Rexton Y200 Manual page 786

SSANGYONG Y200
4. Remove the fixing bolt of middle bearing (center).
YAD3C070
5. Remove the rear axle housing flange yoke bolts/
nuts of rear propeller shaft.
Pull out the rear propeller shaft assembly.
YAD3C080
Installation
1. Check the disassembled parts visually.
2. Align the assembly mark of each propeller shaft.
3. Install the front propeller shaft.
Installation Notice
Tightening Torque
YAD3C090
4. Set up the rear propeller shaft between the
transmission and axle housing. Tighten the center
bearing manually.
Installation Notice
Tightening Torque
YAD3C100
PROPELLER SHAFT 3C-7
81 - 89 N•m
(60 - 66 lb-ft)
80 - 95 N•m
(59 - 70 lb-ft)