1F2-66 M161 ENGINE CONTROLS
Failure
Description
Code
Stop lamp switch failure
135
Circuit Description
The stop lamp switch is normally opened. When the ignition switch ON and brake ON, the battery voltage is
supplied to the ECM. A scan tool should display ON when brake pedal is depressed and should read OFF with
brake pedal released.
STOP LAMP SWITCH
Trouble Area
When malfunction of stop
lamp switch-implausible
condition of stop lamp
signal input
Maintenance Hint
•
Monitoring the actual operational status
and vehicle speed signal through scan
tool
•
Inspection the Engine Control Module
(ECM) pin 49 about short circuit or open
with bad contact
•
Inspection the contact condition of stop
lamp switch
•
Inspection the ECM
YAD1F550
SSANGYONG Y200