Table of Contents
Advertisement
Step
Check the voltage at the battery.
1
Is the voltage equal to the specified value?
Charge or replace the battery, as required.
2
Is the repair complete?
Check fuse F7 in the I/P fuse block.
3
Is the fuse blown?
1. Replace fuse F7.
2. Turn the ignition to ON.
4
Does the fuse blow again?
Check the ABS function.
5
Is the repair complete?
1. Turn the ignition to OFF.
2. Remove fuse F7.
6
3. Disconnect the ABS connector from the EBCM.
4. Measure the resistance to ground at terminals 15.
Does the ohmmeter show the specified value?
Repair the short to ground in circuit between F7 and
the ABS harness EBCM connector.
7
Is the repair complete?
1. Turn the ignition to ON.
2. Check the voltage at fuse F2.
8
Is the voltage equal to the specified value?
Repair the power supply to fuse 2.
9
Is the repair complete?
Check fuse F2 in the I/P fuse block.
10
Is the fuse F2 blown?
1. Replace fuse F2.
11
2. Turn the ignition to ON.
Does the fuse blow again?
Check the ABS function.
12
Is the repair complete?
1. Turn the ignition to OFF.
2. Remove fuse F2.
3. Disconnect the ABS connector from the EBCM.
13
4. Measure the resistance between ground and
terminal 20.
Is the resistance equal to the specified value?
Repair the short to ground in circuit fuse F2 of the I/P
fuse block and terminal 20 of the ABS harness EBCM
14
connector.
Is the repair complete?
1. Disconnect the EBCM connector from the EBCM.
2. Turn the ignition to ON.
3. Check for the presence of battery voltage between
15
ground and terminal 17, 18.
Is the voltage equal to the specified value?
SSANGYONG Y200
Power Supply to Control Module, No DTCs Stored
Action
ABS AND TCS 4E-33
Value
Yes
11 - 14 V
Go to Step 3
-
System OK
-
Go to Step 4
-
Go to Step 6
-
System OK
≈ 0 Ω
Go to Step 7
-
System OK
11 - 14 V
Go to Step 10
-
System OK
-
Go to Step 14
-
Go to Step 13
-
System OK
≈ 0 Ω
Go to Step 14
-
System OK
11 - 14 V
Go to Step 10
No
Go to Step 2
-
Go to Step 8
Go to Step 5
-
Go to Step 26
-
Go to Step 9
-
Go to Step 18
Go to Step 12
-
Go to Step 13
-
Go to Step 9
Advertisement
Chapters
Table of Contents
