Table of Contents
Advertisement
SSANGYONG Y200
Inspection
1. Check the shaft spline for the wear and damage.
YAD3D400
2. Measure the run-out of shaft.
Specified value
YAD3D410
3. Measure the run-out of shaft flange.
Specified value
YAD3D420
4. Install the axle shaft and measure the clearance
of shaft direction.
Specified value
YAD3D430
REAR AXLE 3D-17
Within 1.0 mm
Within 0.13 mm
Within 0.38 mm
Advertisement
Chapters
Table of Contents
