Camshaft Actuator - SSANGYONG Rexton Y200 Manual

1F2-20 M161 ENGINE CONTROLS
1 Bolt

2 Camshaft Actuator

3 Bolt
When the engine is running, the camshaft actuator rotates the intake camshaft hydraulically and mechanically
relative to the camshaft sprocket by 20 ° crank angle to the "advanced" position and back to the "retard"
position.
The camshaft actuator is actuated electro-mechanically by the Engine Control Module (ECM).
The positioning time of apporx. 1 second is dependent on the engine oil pressure at the camshaft actuator and on
the oil viscosity and oil temperature, respectively.
The camshaft indicator on the camshaft sprocket provides the camshaft rotational speed to the position sensor
as an input parameter for the engine ignition control unit.
Engine RPM
Engine stop
0 ~ 1,740 rpm
1,740 ~ 3,540 rpm
Above 3,540 rpm
CAMSHAFT ACTUATOR
Operation Condition of Camshaft Actuator
Camshaft Position
Retard
Retard
Advanced
Retard
4 Armature
5 Roll Pin
6 Nut
Idle speed is improved
Blow-by gas is decreased
Valve overlap is decreased
Torque is increased
Fuel loss is decreased
NOx is decreased
Engine overrun is prohibited
YAA1F970
Effect
-
SSANGYONG Y200