Cooling Fan - SSANGYONG Rexton Y200 Manual

1F1-62 M162 ENGINE CONTROLS
Failure
Description
Code
Cooling fan (HI) relay
short circuit to power
44
Cooling fan (HI) relay
short circuit to ground
45
or open
Circuit Description
Ignition voltage is supplied directly to the cooling fan relay coil. The ECM controls the relay by grounding the control
circuit. When the ECM is commanding a command ON, the voltage of the control circuit should be low (near 0 volt).
When the ECM is commanding the control circuit should be high (near battery voltage). If the fault detection circuit
senses a voltage other than what is expected, the fault line status will change causing the fault code to set.

COOLING FAN

Trouble Area
Cooling fan short circuit to
power
Cooling fan short circuit to
ground or open with bad
contact
Maintenance Hint
•
Inspection the Engine Control Module
(ECM) pin 35 about short circuit or open
with bad contact
•
Inspection the power source
•
Inspection the cooling fan
•
Inspection the ECM
YAD1F510
SSANGYONG Y200