SSANGYONG Rexton Y200 Manual page 232

SSANGYONG Y200
M161 ENGINE MECHANICAL 1B2-71
12. Place the outer plate (7, thickness 1.2 mm) inside
the thrust piece (b).
YAD1B2D0
13. Install the chain assembly 000 589 58 43 00 above
the link and tighten the spindle (c) until a block is
felt.
14. Place the chain assembly 000 589 58 43 00.
YAD1B2E0
15. Replace the thrust piece (b) as shown in the figure.
YAD1B2F0
16. Install the chain assembly 000 589 58 43 00 to
the link pin and tighten the spindle (c).
Installation Notice
Tightening Torque
YAD1B2E0
30 N•m (22 lb-ft)