1B3-116 DIESEL ENGINE MECHANICAL
9. Pull out the locking washer.
Notice: Check the condition of locking washer and
replace if necessary.
YAD1BCM0
Installation Procedure
1. Insert the locking washer.
2. Check the valve tappet and ensure that tappet
moves smoothly.
3. Coat the camshaft with oil and install the camshaft
onto the cylinder head so that the TDC marking
(arrow) is positioned upward vertically.
YAD1BCN0
4. Install the camshaft bearing caps according to
markings(1, 2, 3 etc.).
YAD1BCP0
5. Tighten the camshaft bearing cap bolts acccording
to installation order.
Installation Notice
Tightening Torque
Tighten the No. 1 bolts (light arrow) by one
revolution in stages first and then tighten the No.
2 bolts (dark arrow).
YAD1BCQ0
25 N•m (18 lb-ft)+ 90°
SSANGYONG Y200