1B2-80 M161 ENGINE MECHANICAL
Removal Procedure
1. Unscrew the connecting rod bolt (3) and remove
the cap.
2. Remove the connecting rod and the piston upward.
Notice: Make sure that the bearing cap and shell
are not changed each other.
3. Removethe snapring (5)and pulloutthepiston pin
(6).
Notice: Remove the snap ring using a clean cloth
as shown in the right picture so that the piston,
piston ring, and the snap ring don't get damaged.
YAD1B2Q0
Installation Procedure
YAD1B2R0
SSANGYONG Y200