SSANGYONG Rexton Y200 Manual page 853

4B-14 FRONT BRAKE
Assembly Procedure
1. Installation should follow the removal procedure
in the reverse order.
Notice: Clean all the parts in denatured alcohol or
brake fluid. Dry the parts with unlubricated
compressed air and blow out all the passages in
the housing and the bleeder valve.
Apply the brake fluid on the surface of the piston
and cylinder.
2. Fasten the guide rod bolt as specified torque.
Installation Notice
YAD4B280
Tightening Torque
3. Fasten the bleeder screw as specified torque.
Installation Notice
Tightening Torque
YAD4B290
22 - 32 N•m
(16 - 24 lb-ft)
7 - 13 N•m
(62 - 115 lb-in)
SSANGYONG Y200