SSANGYONG Rexton Y200 Manual page 221

1B2-60 M161 ENGINE MECHANICAL
Tools Required
111 589 01 59 00 Supporting Bar
111 589 18 61 00 Lever Pusher
111 589 25 63 00 Thrust Piece
602 589 00 40 00 Engine Lock
DW110 - 090
DW110 - 100
Removal & Installation Procedure
1. Place the supporting bar 111 589 01 59 00 (a) at
the camshaft bearing cap and tighten them with
the bearing cap bolt.
YAD1B1B0
Installation Notice
Tightening Torque
2. Turn the crankshaft to position the each cylinder
piston at TDC.
Tightening Torque
Notice:
•
Remove the valve spring only at TDC.
•
Always rotate the crankshaft by holding the
chain to prevent from timing chain damage and
tangling, and for smooth rotation.
YAD1B7J0
3. Remove the valve tappet using the valve tappet
remover DW110 - 100.
4. Install the connecting hose DW110 - 090 (c) to
the spark plug hole.
YAD1B1D0
Connecting Hose
Valve Tappet Remover
22.5 - 27.5 N•m
(16.6 - 20.3 lb-ft)
1st step: 18 - 22 N•m
(13 - 16 lb-ft)
2nd step: 90° ± 5°
SSANGYONG Y200