SSANGYONG Rexton Y200 Manual page 246

SSANGYONG Y200
M161 ENGINE MECHANICAL 1B2-85
Replacement Procedure
1. Measure the piston ring's gap.
End Gap of the
Piston Ring
Gap Between
the Piston and the
Piston Ring
Notice: If out of specification, replace the piston
ring.
2. Remove the piston ring with a pliers.
YAD1B2U0
3. For installation, position the piston ring to be the
'TOP' mark on the piston ring upward and arrange
the piston ring ends to be 120 ° part.
4. Adjust the hook spring joint in the oil ring 180 °
way from the ring end.
YAD1B2V0
Groove 1 0.20 - 0.40 mm
Groove 2 0.20 - 0.40 mm
Groove 3 0.20 - 0.45 mm
Groove 1 0.028 - 0.060 mm
Groove 2 0.010 - 0.045 mm
Groove 3 0.010 - 0.045 mm