SSANGYONG Rexton Y200 Manual page 806

SSANGYONG Y200
11. Remove the stabilizer bar.
YAD3D320
12. Remove the lateral rod mounting nut and detach
the lateral rod from the axle housing.
YAD3D330
13. Lowering the axle slowly, remove the coil spring
& spring seat.
14. Lower the axle housing by using the safety jack.
YAD3D340
Installation
1. Placing the rear axle housing on the assembly
position, install both coil springs.
YAD3D350
REAR AXLE 3D-15