SSANGYONG Rexton Y200 Manual page 836

4A-22 BRAKE SYSTEM
•
Remove the bracket of the connecting pipe from
the 3-way connector.
YAD4A540
2. Remove the front brake hose.
•
Remove the brake pipe nut.
•
Remove the E-ring.
•
Disconnect the strut from the brake mounting.
•
Remove the union bolt from the caliper and
remove the brake hose.
YAD4A550
3. Remove the rear brake hose.
•
Remove the brake pipe nut.
•
Remove the E-ring.
•
Disconnect the strut from the brake mounting.
•
Remove the union bolt from the caliper and
remove the brake hose.
- For disc type : from the caliper
YAD4A560
- For drum type : from the cylinder
YAD4A570
SSANGYONG Y200