1B3-12 DIESEL ENGINE MECHANICAL
5. Remove the drain plug and seal from the cylinder
block and drain the coolant completely.
Installation Notice
Tightening Torque
After draining, replace the seal and reinstall the
drain plug.
YAD1BAB0
6. Disconnect the lower coolant hose from the
radiator.
YAD1BAC0
7. Disconnect the upper coolant hose from the
radiator.
YAD1BAD0
8. Remove the radiator grille mounting screws and
radiator grille.
9. Remove the front end upper member mounting
blots and front end upper.
Installation Notice
Tightening Torque
YAD1BAE0
30 N•m (22 lb-ft)
30 - 40 N•m
(22 - 30 lb-ft)
SSANGYONG Y200