Crankcase Guide Rail - SSANGYONG Rexton Y200 Manual

Hide thumbs Also See for Rexton Y200:

Table of Contents

1B2-76 M161 ENGINE MECHANICAL

Preceding Work:

Removal of timing gear case cover

1 Guide Rail Pin

2 Guide Rail

CRANKCASE GUIDE RAIL

3 Timing Gear Case Cover

Removal & Installation Procedure

1. Remove the timing gear case cover (3).

2. Remove the guide rail (2) from the guide rail pin

3. Installation should follow the removal procedure

Notice: Be careful not to damage the gasket when

removing / installing the timing gear case cover.

Replace the plastic guide (2) if damaged.

Connect the plastic guide (2) and the guide rail

(1) by aligning them accurately when installing.

in the reverse order.

SSANGYONG Y200

Table of Contents