SSANGYONG Rexton Y200 Manual page 184

SSANGYONG Y200
M161 ENGINE MECHANICAL 1B2-23
Removal & Installation Procedure
1. Remove the intake air duct.
Installation Notice
Tightening Torque
YAD1B4T0
YAD1B5A0
2. Remove the spark plug cover.
Installation Notice
Tightening Torque
Notice: Release 3 screws from the spark plug
cover and remove the cover for M161 Engine coil.
YAD1B5X0
3. Remove the spark plug connector and ignition
cable.
4. Unscrew the bolts (3) and remove the head cover
and the gasket.
Installation Notice
Tightening Torque
Notice: Replace the gasket with a new one if
necessary.
5. Installation should follow the removal procedure
in the reverse order.
YAD1B5Y0
6. Check for oil leaks by operating the engine.
9 - 11 N•m
(80 - 97 lb-ft)
9 - 11 N•m
(80 - 97 lb-ft)
9 - 11 N•m
(80 - 97 lb-ft)