Brake Booster - SSANGYONG Rexton Y200 Manual

SSANGYONG Y200

BRAKE BOOSTER

Removal Procedure
1. Remove the master cylinder assembly and pull
out the cotter pin from the push rod of the brake
booster.
2. Remove the clevis pin.
YAD4A420
3. Remove the nuts mounting the booster.
YAD4A430
4. Remove the brake booster from the vehicle.
YAD4A440
Installation Procedure
1. Installation should follow the removal procedure
in the reverse order.
2. Bleed the brake system after the installation.
YAD4A450
BRAKE SYSTEM 4A-19