Table of Contents
Advertisement
4E-22 ABS AND TCS
Step
Check the wiring harnesses and the connectors in
circuit from the I/P cluster terminal B7 to terminal 20 of
14
the EBCM connector.
Is the voltage equal to the specified value?
Repair the open or the resistance found.
15
Is the repair complete?
Check for continuity between terminal 16 of the EBCM
connector and ground G106.
16
Is the continuity equal to the specified value?
Replace the ABS unit.
17
Is the repair complete?
Repair the continuity problem between terminal 16 of
the EBCM connector and ground G106.
18
Is the repair complete?
1. Turn the ignition to LOCK.
2. Check fuse F2 in the I/P fuse block.
19
Is fuse F2 blown?
Replace fuse F2.
20
Is the repair complete?
1. Turn the ignition on.
2. Check the voltage at Fuse 2.
21
Is the voltage equal to the specified value?
Repair the power supply to Fuse 2.
22
Is the repair complete?
1. Remove the instrument cluster.
2. Check the circuit from fuse F2 to terminal B15 of
the I/P cluster connector.
23
3. Repair any open or high resistance found in a
wiring harness, splice pack, or connector.
Is the repair complete?
ABS Indicator Lamp Inoperative (Cont'd)
Action
Value
Yes
∞
Go to Step 15
-
System OK
≈ 0 Ω
Go to Step 10
-
System OK
-
System OK
Go to Step 20
-
-
System OK
11 - 14 V
Go to Step 22
-
System OK
-
System OK
No
Go to Step 16
-
Go to Step 9
-
-
Go to Step 21
-
Go to Step 21
-
-
SSANGYONG Y200
Advertisement
Chapters
Table of Contents
