SSANGYONG Rexton Y200 Manual page 807

3D-16 REAR AXLE
2. Install the lateral rod in axle hosing.
Notice: Do not tighten the nuts completely.
Installation Notice
Tightening Torque
3. Install the shock absorber in axle housing.
Installation Notice
Tightening Torque
YAD3D360
4. Install the stabilizer bar and upper/lower arm in
axle housing
Installation Notice
Stabilizer bar cap bolt
Upper arm nut
Lower arm nut
YAD3D370
5. Install the propeller shaft of rear axle side and
tighten above the fixing bolts/nuts.
Installation Notice
Tightening Torque
YAD3D380
6. Install the brake cable, air bleeder hose, oil pipe,
LCRV unit in rear axle assembly with assembled
completely.
Installation Notice
LCRV Mounting Bolt
Air Breather Hose Bolt
Brake Oil Pipe (M10)
YAD3D390
7. Bleeding the air in brake, install the tire.
150 - 180 N•m
30 - 45 N•m
(22 - 33 lb-ft)
30 - 45 N•m
(22 - 33 lb-ft)
150 - 180 N•m
150 - 180 N•m
70 - 80 N•m
(52 - 59 lb-ft)
12 - 23 N•m
(9 - 17 lb-ft)
6 - 8 N•m
(53 - 71 lb-in)
15 - 19 N•m
(11 - 14 lb-ft)
SSANGYONG Y200